Geeetech A10M A20 A20M A10T A20T A30T 3d Printer Fast Assembly with Super Hotbed Filament Detector Power Failure Printing

SERVICE:

Geeetech A10MMix-color 3D Printer

           Geeetech A10M 3D printer, adopting open source GT2560 control board, delivers mix-color objects and greatly enriches your 3D printing life. Keeping the good performance of its predecessor A10, it aims to provide users with quality printout and satisfactory printing experience.

           The modularized design provides you with an easier assembly experience. Its classic blue and black color combo imparts a touch of simplicity and excellence, embodying Geeetech’s commitment to quality products.

           Keeping Prusa I3 3D printers’ gantry structure and with its build volume as 220*220*260mm³, A10M makes the best of the building platform and enables you to view the printing details in 360°. Printing at the accuracy of 0.1mm, it delivers objects with smooth surface finish, clear angles and strong structure. Besides, A10M comes with filament detector and break-resuming capability, greatly enhancing your 3D printing experience.

           Its well-designed extruder greatly reduces the risk of clogging or leaking. A10M extruder cover features 360°ventilation design, greatly enhancing the dissipation of heat and guaranteeing excellent printing quality.

           A10M extruder motor uses a gear train of 3:1 speed ratio, amplifying input torque and improving your printing experience. Adopting the modularized design for extruder wiring, A10M makes it easy to exchange the wire.

           The V-shaped wheels and rails on each axis, made from wear-resistant aluminum profile, could, in a large measure, reduce the printing noise and offer you a quiet 3D printing environment.

           A10M uses silicon carbide glass as its printing platform, greatly enhancing the adhesion of first layer and making it so easy to take down the print.

Geeetech A30 3d Printer

Dear buyers:

This A30 printer is open source based on SMARTTO firmware devloped by geeetech  !

You need to buy  a 3d wifi Module separately if you need the remote control function!!!

Click the picture to get the 3d wifi Module

You need to buy an auto leveling sensor separately if you need the Auto leveling function!!!

Click the picture to get the auto leveling sensor

Geeetech A30 is a new addition to Geeetech’s extensive range of desktop 3D printers. Embellished with blue strips, it looks solemn and vigorous, representing its quality printing performance and good craftsmanship.

The sturdy frame, strong and wear-resistant, greatly improves the stability of the machine during printing. Besides, this new printer comes almost fully assembled and you just need to fix several screws. The extruder is of remote style, ensuring that the printing head could move quickly, accurately and stably.

With a build volume of 320*320*420 mm, A30 enables you to print large-size 3D models. When it comes to the printing performance, A30 prints at the accuracy of 0.05mm and at the speed of 80-110mm/s, able to deliver items with nice surface and strong structure.

The building platform is of good adhesion, freeing you from the headache of first layer warping. We choose silicon carbide glass with microporous coating as A30 building platform, without the need of attaching the masking tape. The silicon carbide glass is of chemical stability, high heat conductivity coefficient, good wear-resistance and can withstand extreme temperature. The special coating is inorganic and has a hardness of 8 Mohs, hence of high durability. Compared with aluminum plate, this kind of tempered glass is of better adhesion and flatness and easy to take prints off. Besides, it is easy to clean with water or alcohol.

Placing the control box aside makes the whole frame simpler without reducing its stability. The touch screen and filament holder perfectly fit on the box, convenient for you to direct control over the printer and load filament. What’s more, the Geeetech logo is eye-catching but not out of place against the black tone.

Its two other user-oriented features are filament detector and break-resuming capability. The former will detect the abnormal situation of filament, such as filament fracture and outage, and trigger a signal to remind you to change printing material in time. The latter, a resurrection system, is added to save real-time printing status and resume the printing job exactly at the same place where it has been stopped. This add-on totally drives away the hassle of repetitive and time-consuming printing jobs caused by unexpected power outage. Totally get you out of worries about printing large-size 3D models.

 A30 could be controlled via the touch screen, EasyPrint 3D App, or the host software on a computer. The 3.2″ full-color touch screen, intuitive and easy-to-use, enables you to manually control the whole printing process. Combining the touch screen with a TF card, the printer could run untethered to the computer.

It is also practical for beginners and pros to control the printer with Geeetech self-developed printing and control software EasyPrint 3D, via which it is easy to slice a model, set the relevant printing parameters and upgrade firmware in time.

 In addition, after simple Wi-Fi configuration with our 3D WiFi module (optional add-on), you could use EasyPrint 3D App to remote control A30 and enjoy a large number of free 3D models.

A30 supports auto-leveling function with a capacitive proximity sensor (optional add-on), ensuring that the printout has a flat first layer and strong structure.

Besides, A30 is compatible with a wide range of filaments, covering PLA, ABS, nylon, wood polymers, etc. You could produce items of various styles and obtain indescribable printing joys.